When enjoying outdoor activities on a sunny day that involves water, you must ensure your pool float is set to be used. They make excellent float toys in big swimming pools, ponds, lakes, and rivers. Some middle-priced inflatable pools can also be used as rafts. You could utilize an inflatable pool as a tiny boat on the surface of the water with a few simple alterations and a pair of paddles. Pool floats can only be used when they are pumped.

Here are several quick and simple ways to inflate an inflatable pool.

Inflate Manually

Place the float on a worktop in a flat position. The stem of the valve should point upwards. To open the stem of the valve, firmly squeeze the bottom of the stem which links to the float with your index and thumb. Position your lips on the stem of the valve, and forcibly push air into the float via the stem of valve.

Continue inflating the float till it becomes firm. Also do not over-inflate the float, but it must be entirely solid when pressed with the hands. Put the cap on the stem of the valve to close it. Drive the stem of the valve into the float, if feasible, by retaining your index finger on the sealed stem and pressing forcefully to move the valve of the stem into the pool float.

Using an Electric Pump

The fastest way to fill up a float is with an electric air pump. Any 110-120V household outlet may be used to power the air pump. If you need to, you can use an extension cord. Using the right attachment, connect the pump to the valve on your float. Make sure the valve is all the way in. Turn on the electric pump and fill all of the inflatable’s air chambers. Tighten up all air chambers all the way and make sure the valves are pushed all the way into the float.

Using Water Bottle and a Hairdryer

Cut off the top of a plastic water bottle and use duct tape to attach it to the end of a hair dryer. Ensure you employ the water bottle’s small nozzle. The concept is to use a water bottle’s nozzle to direct all of the air from a blow dryer into the inflatable. After you’ve linked your new customized water bottle connection to the dryer, push it against the air input valve on the float and switch on the dryer.

Take this into consideration: It is fundamental to turn the hairdryer to a cold mode setting before using it as the heat mode setting could injure the inflatable float material, if you damage the material, you can kiss your afternoon of leisure goodbye.